Deprecated: mysql_connect(): The mysql extension is deprecated and will be removed in the future: use mysqli or PDO instead in /home/scopeint/public_html/system/database/mysql.php on line 6
Series 9000 H Heated Hydrocarbon Analyzer

Series 9000 H Heated Hydrocarbon Analyzer

Series 9000 H Heated Hydrocarbon Analyzer
Partner: Baseline
Availability: EX Works
Qty:  
The Baseline® Series 9000 H is a high-temperature member of the extraordinary Series 9000 family of gas analyzers. The Series 9000 is the candidate of choice whenever accurate, reliable hydrocarbon analysis is required.

The Series 9000 H has a dynamic range from 0.1 ppm to 10% (Propane) or 0.3 ppm to 50% (Methane). The analyzer has a generous complement of analog, digital and logic output capabilities. These features place the instrument well ahead of the competition in performance, automation, and configurability.

The analyzer is based on a flame ionization detector (FID) with FlowGuard electronic control that delivers a small portion of the sample gas to the detector flame. During the combustion process, organic or hydrocarbon-based gases in the sample are ionized then they can be detected by the instrument and reported as a concentration.

The Series 9000 H is configured for single point analysis of samples heated up to 376 ºF (191ºC). The automatic calibration feature enhances the long-term analytical stability of the instrument.
Applications  
The Series 9000 H is designed to continuously monitor the total hydrocarbon content of gases and maintain the temperature of heated sample above their dew point. This extremely versatile instrument can be configured to support a variety of applications, such as:
  • Compliance monitoring for EPA Methods 25A & 503
  • Continuous Emission Monitoring (CEM) of source hydrocarbons
  • Scrubber & oxidizer efficiency
  • Carbon bed breakthrough detection
  • LEL monitoring
  • Vehicle emissions
  • Chemical process blending
     
 
Features  
  • Flame ionization detector.
  • 3U case, 19" (48.3cm) rack mountable.
  • Hydrocarbon detection from sub-ppm to 50% levels (Methane).
  • Automatic calibration at user-defined intervals.
  • Internal, multipoint sampling option.
  • FlowGuard electronic control of fuel, air and sample.
  • Electronic back-pressure regulator with sample bypass system ensures fast response.
  • Discrete, multilevel concentration & fault alarms.
  • Programmable relays for concentration alarms, events and diagnostics.
  • Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air.
  • Remote operation via RS-232 and Ethernet.
  • Graphical display and easy to use menu system.
  • Optional 9000 Keeper software to monitor and control the instrument remotely.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

The Baseline® Series 9000 H is a high-temperature member of the extraordinary Series 9000 family of gas analyzers. The Series 9000 is the candidate of choice whenever accurate, reliable hydrocarbon analysis is required.

The Series 9000 H has a dynamic range from 0.1 ppm to 10% (Propane) or 0.3 ppm to 50% (Methane). The analyzer has a generous complement of analog, digital and logic output capabilities. These features place the instrument well ahead of the competition in performance, automation, and configurability.

The analyzer is based on a flame ionization detector (FID) with FlowGuard electronic control that delivers a small portion of the sample gas to the detector flame. During the combustion process, organic or hydrocarbon-based gases in the sample are ionized then they can be detected by the instrument and reported as a concentration.

The Series 9000 H is configured for single point analysis of samples heated up to 376 ºF (191ºC). The automatic calibration feature enhances the long-term analytical stability of the instrument.
Applications  
The Series 9000 H is designed to continuously monitor the total hydrocarbon content of gases and maintain the temperature of heated sample above their dew point. This extremely versatile instrument can be configured to support a variety of applications, such as:
  • Compliance monitoring for EPA Methods 25A & 503
  • Continuous Emission Monitoring (CEM) of source hydrocarbons
  • Scrubber & oxidizer efficiency
  • Carbon bed breakthrough detection
  • LEL monitoring
  • Vehicle emissions
  • Chemical process blending
     
 
Features  
  • Flame ionization detector.
  • 3U case, 19" (48.3cm) rack mountable.
  • Hydrocarbon detection from sub-ppm to 50% levels (Methane).
  • Automatic calibration at user-defined intervals.
  • Internal, multipoint sampling option.
  • FlowGuard electronic control of fuel, air and sample.
  • Electronic back-pressure regulator with sample bypass system ensures fast response.
  • Discrete, multilevel concentration & fault alarms.
  • Programmable relays for concentration alarms, events and diagnostics.
  • Automatic FID ignition, with automatic shut-off of sample, fuel and combustion air.
  • Remote operation via RS-232 and Ethernet.
  • Graphical display and easy to use menu system.
  • Optional 9000 Keeper software to monitor and control the instrument remotely.

Reviews (0)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyrights strictly reserved by the respective corporate entities